Custom Badge Holders & ID Card Holders
Pick your holder
Showing all 4 results
-

Custom Badge Holders
MOQ 100 · Made to order As low as $0.34(C)at 2,500+ units Add to cart -

Customizable Retractor 1 1/4″ Badge Holder
MOQ 250 · Made to order Request a quote for pricingFirm pricing within 1 business day Request a quote -

Customizable Retractor 1 3/8″ Badge Holder
MOQ 100 · Made to order Request a quote for pricingFirm pricing within 1 business day Request a quote -

Metal Clip on Clear Vinyl Badge Holder
MOQ 100 · Made to order Request a quote for pricingFirm pricing within 1 business day Request a quote
A badge holder has one job: keep the card readable and attached for the whole time somebody is on your site.
Badge holders fail in boring, predictable ways. The card slips out because the holder was cut for a thinner card. The print wears off the card because the window is scratched and abrasive. The holder cracks at the slot punch after a winter. The clip lets go and the badge is on the ground in a lay-down yard. None of those are exotic problems, and all of them are specification problems that get decided before the order is placed — which is why it is worth spending two minutes on the card before you buy the holder.
Start with the card, not the holder. A standard printed ID card is ISO/IEC 7810 ID-1 — 85.6 x 54 mm, or 3 3/8" x 2 1/8", at 0.76 mm thick. That is the card most badge holders are cut for, and if that is what you are carrying, almost anything fits. The trap is the clamshell proximity card: the moulded access-control cards used on a great many Alberta sites are roughly twice the thickness of a printed card, and a holder sized for a standard card will not take one, or will take one and split. If your badge is also a door fob, say so when you order — it changes which holder you need. Cards printed on thicker composite stock, and any badge carried in a holder together with a second card, have the same effect.
Rigid or flexible. Rigid holders protect the card better, keep it flat and readable, and are the right answer where the badge is scanned or read at a distance. Flexible vinyl holders are more comfortable worn against the body, cost less, and are usually what a short-term visitor programme wants. Where a badge is handled dozens of times a day, rigid wins on total cost even though it costs more per unit, because the card underneath stays legible.
How it attaches. Slot punch for a lanyard or a clip is the default. A bulldog clip suits a shirt pocket or a lapel; a swivel J-hook suits a lanyard; a combination clip-and-pin covers both. Arm badges with an elastic strap and hard hat badge holders are what most industrial sites actually need, because there is nowhere on the coveralls to clip a badge and a lanyard around the neck is a snag hazard near rotating equipment. Magnetic badge fasteners avoid pinholes in clothing — worth knowing if your people are in their own clothes rather than issued gear.
Branding and colour coding. Holders can be silk screened with your logo, and — far more usefully — colour coded so that a supervisor can tell a contractor from an employee from a visitor from thirty feet away. If you run a site access programme with escort requirements, colour coding the holder does more for compliance than anything printed on the card.
Card sizes
- Standard ID card
- ISO/IEC 7810 ID-1 — 85.6 x 54 mm (3 3/8" x 2 1/8"), 0.76 mm thick
- Clamshell prox
- Roughly double the thickness of a printed card — needs a holder built for it, so tell us if your badge is also a door fob
- Thick or double
- Composite stock, or two cards carried together, need the same allowance
- Orientation
- Portrait or landscape — specify, because the slot punch and window differ
Styles and attachment
- Rigid
- Best protection and legibility; the choice where the badge is read or scanned often
- Flexible
- Softer against the body, lower cost; suits visitor and short-term programmes
- Arm badge
- Elastic strap — the practical answer on a site where there is nothing to clip to
- Hard hat
- Holder mounted to the helmet where a neck lanyard is a snag hazard
- Attachment
- Slot punch, bulldog clip, swivel J-hook, clip-and-pin combination, magnetic fastener, badge reel
- Decoration
- Silk screened logo, and colour coding by access level — visitor, contractor, employee, escort required
Badge Holders — answered.
Will your holders fit a proximity access card?
Only if you order them for one. Clamshell proximity cards — the moulded access-control cards used on most secure sites — are roughly twice the thickness of a standard printed ID card, so a holder cut for a printed card either will not close or will split at the seam. Tell us when you order that the badge doubles as a door fob and we will supply the right holder. The same goes for anyone carrying two cards in one holder.
What size is a standard ID card?
ISO/IEC 7810 ID-1: 85.6 x 54 mm, which is 3 3/8" x 2 1/8", at 0.76 mm thick. It is the same footprint as a credit card, and it is what almost every ID card printer produces. If your card came out of a card printer, that is what you have.
Rigid or flexible — which should we buy?
Rigid if the badge is read, scanned or presented often, or if it is going to be in service for more than a few months; the card underneath stays flat and legible far longer, which is usually the real cost. Flexible if it is worn against the body all day, if comfort matters more than protection, or if it is a visitor badge that gets handed back at the end of the day.
Can you colour code holders by access level?
Yes, and we would encourage it. Colour coding the holder — one colour for employees, another for contractors, another for visitors requiring escort — is read instantly from a distance, which is more than can be said for anything printed on the card. We can silk screen the level onto the holder as well, so it is legible close up too.
Do you supply the lanyards as well?
Yes — see our lanyards, which we can supply in matching colours with the attachment that suits the holder you have chosen. Ordering both together is worth doing, because the attachment on the lanyard and the slot punch on the holder have to agree.
Question not answered here? Talk to our Canadian plant — 780.466.9973, Monday to Friday, 8:00 to 4:30.



