Canada's largest manufacturer of health & safety tags and vinyl products · Made in Canada since 1974
sales@canaltabindery.com
Can Alta Bindery & Graphics
0
ANSWERS · NOT BROCHURES

Guides.

Fifty years of manufacturing in Canada produces a lot of answers to questions customers ask before they know what to order. These are those answers — what an Alberta COR audit binder needs, what Section 326 requires on a scaffold tag, what a film durability rating actually covers. Everything here is sourced, and where there is no honest number to give, the guide says so.

GUIDE · ALBERTA COMPLIANCE

Building a COR audit binder that passes.

What goes in an Alberta COR audit binder, how to tab it by audit element, and the scoring rules that should decide its structure. From a Canadian manufacturer.

9 min readRead the guide →
GUIDE · ALBERTA OHS CODE

Scaffold tags: what Alberta actually requires.

Alberta OHS Code Part 23 section 326 sets out exactly what a scaffold tag must show, what green, yellow and red mean, and the 21-day inspection interval.

7 min readRead the guide →
GUIDE · WHMIS & ALBERTA OHS

Safety data sheets on site.

Alberta OHS Code Part 29 requires safety data sheets to be readily available at the work site. What that means, and how to build an SDS binder that works.

8 min readRead the guide →
GUIDE · MATERIALS

Choosing a tag that survives −40.

Polyethylene tag stock, thickness, grommet sizing and writing surfaces — how to specify a tag that stays legible through an Alberta winter.

7 min readRead the guide →
GUIDE · SPECIFYING

How to choose a custom binder.

Ring type and size, realistic sheet capacity, and the three construction methods — vinyl over board, turned edge and poly. What each one is actually for.

9 min readRead the guide →
GUIDE · SPECIFYING

Index tabs, properly specified.

How tab banks and cuts work, the arithmetic that sets tab width, which stocks to use, and why Mylar reinforcement matters on a binder opened daily.

7 min readRead the guide →
GUIDE · DECAL MATERIALS

Cast vs calendered vinyl, decided properly.

How cast and calendered vinyl are made, why one shrinks and one does not, what the published durability figures actually cover, and how to choose between them.

8 min readRead the guide →
GUIDE · REFLECTIVE MATERIALS

Reflective sheeting grades, without the marketing.

What ASTM D4956 Type I, Type IV and Type XI actually mean, how glass bead and prismatic optics differ, and why the standard says nothing about service life.

7 min readRead the guide →
GUIDE · DIPLOMA COVERS

Sizing a diploma or certificate holder.

How to convert a certificate size into a cover size, why the cover is always larger than the document, and the corner, ribbon and imprint choices that follow.

6 min readRead the guide →
GUIDE · ID & ACCESS

Buying lanyards: widths, attachments, and one persistent myth.

Standard lanyard widths and lengths, how to choose an attachment, when a breakaway makes sense, and why no standard actually requires one.

7 min readRead the guide →
GUIDE · ID & ACCESS

Sizing a card or badge holder properly.

The ISO/IEC 7810 ID-1 card size, why proximity and clamshell cards do not fit standard holders, and how to choose orientation and material.

6 min readRead the guide →
GUIDE · DECORATION

How your logo gets onto vinyl: four methods compared.

Screen printing, foil stamping, blind debossing and digital printing on vinyl — what each does well, what it costs, and what artwork each needs.

8 min readRead the guide →
GUIDE · DECAL MATERIALS

Decal adhesives, chosen by the surface.

The nine decal adhesives we run, what each one is for, why permanent adhesive fails on textured surfaces, and how to specify one without over-specifying it.

13 min readRead the guide →
GUIDE · DECAL APPLICATION

Inside the glass, or outside it.

Face-applied or back-applied window decals: what each means, which one needs mirrored artwork, which materials work behind glass, and how to avoid a reprint.

11 min readRead the guide →
GUIDE · BINDERS

Rings, capacities, and everything else you specify on a binder.

The three ring mechanisms and what their nominal sizes actually measure, a real sheet-capacity chart, standard sheet sizes stated binding-edge first, six pocket styles, label holders and the three spine imprint orientations.

10 min readRead the guide →
1974Manufacturing since
5–15working-day production
Freeelectronic proof
Rushservice available

Question these do not answer? Talk to our Canadian plant — 780.466.9973, Monday to Friday, 8:00 to 4:30.

DISTRIBUTOR PROGRAM

Distributors: sell it as your own.

Blind drop-shipping under your label, distributor pricing that protects your margin, and a factory that answers the phone. Apply for a trade account in two minutes.

Become a distributor