Scaffold tags: what Alberta actually requires.
Can Alta is Canada’s largest manufacturer of health and safety tags. Most scaffold tag information online is written for American sites and quotes OSHA, which does not govern an Alberta scaffold. Alberta has its own rule, it is specific, and it names five things your tag has to carry. Here is what Part 23 section 326 says, and what it means for the tag you order.
The five things the tag has to show
Section 326 of the Alberta OHS Code — Tagging requirements, in Part 23, Scaffolds and Temporary Work Platforms — requires the tag to carry the duty rating of the scaffold, the date of the last inspection, the name of the competent worker who carried out that inspection, any precautions necessary while working on the scaffold, and the tag’s expiry date.
That list is the specification for your tag. Every one of those five is a field a worker has to fill in with a marker, in the field, often with gloves on, often in poor light. A tag that leaves 8 mm for a name and a date is a tag that gets filled in illegibly, and an illegible inspection record is functionally no record at all.
Design the writing areas around the worst case, not the best one. This is the single most common failure we see in tags customers bring to us to be re-made.
What green, yellow and red mean
The colour system is three-state, and the middle state is the one people get wrong.
- Green — safe for use, or wording to that effect. The scaffold has been inspected by a competent worker and is fit for service.
- Yellow — caution: potential or unusual hazard, or wording to that effect. Critically, a yellow tag must describe the precautions that apply. A yellow tag with no written precaution is not doing its job.
- Red — unsafe for use, or wording to that effect.
Yellow does not mean “nearly finished” and it does not mean “use with care” in a vague sense. It means there is a specific identified hazard and the tag has to say what it is and what to do about it. That has a direct design consequence: your yellow tag needs materially more writing space than your green one.
The 21-day interval
Scaffolds to which the section applies must be inspected before first use, and at least every 21 calendar days after that, for as long as workers are working from the scaffold or materials are stored on it.
Note “calendar days”, not working days. And note the second half of the rule: a scaffold that has been erected but not put into service, or that has gone more than 21 consecutive calendar days without use, must be tagged red until a competent worker inspects it.
That 21-day cycle is what should drive your order quantity. A tag has a maximum useful life of three weeks before it is replaced or re-signed. Sites that order tags in small quantities run out mid-project and end up improvising, which is exactly the situation the tagging system exists to prevent.
What this means for the tag you buy
An Alberta scaffold tag lives outdoors, gets handled with gloves, and has to stay legible through weather that swings across a hundred degrees over a year. A few things follow:
Material. Paper and card are not candidates. Polyethylene tag stock stays flexible in deep cold instead of going brittle and snapping at the grommet, which is where cold-weather tags fail. We run .023″ and .035″ polyethylene; the heavier stock is the one to specify where a tag is expected to survive a full season on an outdoor scaffold.
The hole. Whatever attaches the tag — wire, zip tie, hook — has to be sized against the grommet, and a grommet is specified by its inside diameter. A #00 grommet is 3/16″ ID; a #2 grommet is 3/8″ ID. Order the tag knowing what will pass through it.
The writing field. Five mandatory pieces of information, filled in outdoors with a marker. Give each one a generous ruled area on a light background. Reversing white text out of a saturated colour looks smart in a proof and is unusable in the field, because nothing writes legibly on it.
Quantity. Work backwards from the 21-day cycle, the number of scaffolds, and the length of the project — then add the tags that will be lost, over-written or destroyed, which in our experience is a meaningful fraction of the total.
One thing this guide will not tell you
You will find suppliers quoting a service life for tag material — “lasts five years outdoors”, that sort of thing. There is no standard test behind those numbers and we are not going to invent one. What we can tell you honestly is what the material does: polyethylene tag stock stays flexible in Alberta cold, resists the solvents and hydrocarbons found on industrial sites, and does not delaminate when wet. How long a specific tag survives depends on UV exposure, abrasion and handling, and any supplier quoting you a single number for that is guessing.
In practice the 21-day inspection cycle matters far more than material lifespan, because the tag is being replaced or re-signed on that cycle regardless.
Scaffold tag specification checklist
- Required fields
- Duty rating · date of last inspection · name of the competent worker · precautions · expiry date
- Colour states
- Green (safe for use) · Yellow (caution — potential or unusual hazard, precautions described) · Red (unsafe for use)
- Inspection interval
- Prior to initial use, then at least every 21 calendar days while in service
- Out of service
- Erected but not in service, or unused more than 21 consecutive calendar days → red tag until re-inspected
- Material
- .023″ or .035″ polyethylene tag stock — stays flexible in deep cold
- Grommet (by inside diameter)
- #00 = 3/16″ ID · #2 = 3/8″ ID
Answered, briefly.
What must a scaffold tag show in Alberta?
Under Alberta OHS Code Part 23 section 326, the tag must show the scaffold’s duty rating, the date of the last inspection, the name of the competent worker who inspected it, any precautions necessary while working on the scaffold, and the tag’s expiry date.
How often do scaffolds have to be inspected in Alberta?
Before initial use, and at least every 21 calendar days thereafter while workers are working from the scaffold or materials are stored on it. A scaffold erected but not put into service, or unused for more than 21 consecutive calendar days, must carry a red tag until a competent worker inspects it.
What does a yellow scaffold tag mean?
Caution — a potential or unusual hazard exists. A yellow tag must describe the precautions that apply. A yellow tag with no written precaution does not satisfy the requirement, which is why yellow tags need more writing space than green ones.
Does OSHA apply to scaffolds in Alberta?
No. OSHA is American. Work on an Alberta site is governed by the Alberta OHS Code, and Part 23 is the part that deals with scaffolds and temporary work platforms. Much of the scaffold tag material online is written to OSHA and does not reflect what an Alberta officer will be looking for.
What material should scaffold tags be made from?
Polyethylene tag stock. It stays flexible in deep cold rather than going brittle and cracking at the grommet, which is how cold-weather tags fail. We run .023″ and .035″; the heavier stock is the one to specify for a full season outdoors.
How many scaffold tags should we order?
Work from the 21-day inspection cycle: number of scaffolds, multiplied by the project length in three-week periods, plus a real allowance for tags lost, over-written or destroyed on site. Running out mid-project is the situation the tagging system exists to prevent.
Talk to the people who make it.
We have manufactured in Canada since 1974. Tell us the application and we will specify it properly — including telling you when the cheaper option is the right one.