Canada's largest manufacturer of health & safety tags and vinyl products · Made in Canada since 1974
sales@canaltabindery.com
Can Alta Bindery & Graphics
0
FORT McMURRAY · WOOD BUFFALO

Canadian-made scaffold tags, SDS binders and equipment decals for Fort McMurray.

Fort McMurray, Alberta·Manufacturing since 1974·Free electronic proof on every order

Can Alta is Canada’s largest manufacturer of health and safety tags and of vinyl products such as binders and diploma holders. We do not have an office in Fort McMurray. We manufacture in Edmonton, roughly 435 km south down Highway 63, and we have been shipping safety tags, SDS and COR binders, hard hat stickers and equipment decals into the Regional Municipality of Wood Buffalo for decades. That is the honest version, and it is worth saying plainly, because a supplier who is vague about where their product is made is usually a supplier who does not make it.

Scaffold tags that satisfy Section 326

Alberta’s Occupational Health and Safety Code, Part 23, section 326, is specific about what a scaffold tag has to carry: the duty rating of the scaffold, the date of the last inspection, the name of the competent worker who inspected it, any precautions a worker needs to take, and the expiry date of the tag. A tag that leaves any of those blank is not doing its job, regardless of how good it looks.

The three-colour system follows from that. Green means the scaffold is complete and safe to use as erected. Yellow means it may be used with the stated precautions. Red means do not use. A scaffold that has been erected but is not yet in service is red-tagged, and so is one that has gone more than 21 calendar days without an inspection.

We print tag sets to that structure — write-on fields sized for a gloved hand and a marker rather than a pen, in stock that does not go brittle when the temperature drops. Our Alberta scaffold tag guide works through the regulation in full, including the parts people most often get wrong.

SDS binders, because a server is not “readily available”

Part 29, section 407 of the OHS Code requires a safety data sheet to be readily available at the work site. On a lease road, at a remote camp, or in a shack with no reception, “readily available” means a physical binder on a shelf that anyone can open, not a PDF on a network somebody would need a signal to reach.

That is why SDS binders remain one of the highest-volume things we ship north. What makes one work is not the cover — it is the tab structure, the ring capacity chosen for the number of sheets you will actually accumulate rather than the number you have today, and a spine that identifies the site at a glance from across a room. The SDS binder guide covers how to build one that survives an inspection.

COR audit binders and the three-year cycle

A Certificate of Recognition is valid for three years, with maintenance audits in between. The audit thresholds are published and unambiguous: 80% overall, at least 50% in every element, and 60% on a maintenance audit. Nothing about a binder changes any of those numbers.

What a well-built audit binder changes is the auditor’s time. An auditor working through an element wants to find the evidence for it without being handed a box. Tabbed to the element structure, with a table of contents that matches the tabs and a spine that says which year it covers, a binder turns a hunt into a lookup. Our COR audit binder guide sets out how to structure one.

We keep the artwork on file, which matters here more than anywhere: three years later the reprint should not require rebuilding the tab set from scratch.

What cold actually does to tags and decals

The failures we hear about from up north are almost never printing failures. They are material and application failures.

Tags. Polyethylene tag stock stays flexible when it is cold, which is why it is the default for valve, equipment and lockout tags in this part of the province — a tag that shatters when it is knocked in February is worse than no tag, because the information disappears with it. We run .020″ for tags that hang and .035″ where the tag takes handling or a heavier grommet. The tag material guide works through the trade-off honestly, including where the thinner stock is genuinely fine.

Decals. Adhesive films have an application temperature range, and cold-weather installs onto cold steel are where most decal complaints originate — not because the film was wrong but because it never properly wet out to the surface. A decal applied to a warm, clean, dry surface behaves very differently from the same decal slapped onto a frozen deck. If the install has to happen in winter, get the substrate warm and clean first; it costs an hour and saves the reorder.

What we will not do is quote you a service life for a decal on your equipment. Film manufacturers publish durability figures for unprinted film in defined exposure conditions, not for a printed graphic on a machine that gets pressure-washed. Anyone who gives you a confident number for your application is guessing. Our cast versus calendered guide explains what those published figures do and do not cover.

Turnarounds, shutdowns and the reorder problem

Demand up north is not smooth. It spikes around turnarounds, shutdowns, audit deadlines and regulatory reissues, and the spike always arrives with less notice than anyone would like.

Two things help. The first is that we keep your artwork, your tag numbering sequences and your tab structures on file, so a reorder is an email rather than a new project. The second is telling us the date rather than the lead time. Production is normally seven to ten working days from proof approval; freight up Highway 63 is on top of that, and we will quote a firm delivery date rather than a hopeful one. When it will not make your date, you will hear that from us early enough to do something about it.

Wood Buffalo beyond the townsite

The same shipments reach Anzac, Fort MacKay, Gregoire Lake Estates, Conklin, Janvier and Saprae Creek, and the work sites and camps between them. Where a delivery has to go to a site rather than a town address, tell us the receiving arrangement up front — gate hours, camp names and site contacts are the usual reason a carton sits somewhere it should not.

SHIPPING TO FORT McMURRAY

Manufactured at
Our Edmonton plant, 8445 Davies Road
Distance
Roughly 435 km, Edmonton to Fort McMurray via Highway 63
Local office
None — we ship from Edmonton
Phone
780.466.9973, Monday to Friday, 8:00 to 4:30
Production time
Seven to ten working days from proof approval, plus transit
Most-shipped
Scaffold and valve tags, SDS binders, COR audit binders, equipment decals, hard hat stickers
Artwork
Kept on file — a reorder is one email
Payment
Purchase order accepted; payment on delivery, or terms on an approved account
COMMON QUESTIONS · FORT MCMURRAY

Answered, briefly.

Do you have a location in Fort McMurray?

No. We manufacture in Edmonton at 8445 Davies Road and ship to Fort McMurray and the Regional Municipality of Wood Buffalo, roughly 435 km north via Highway 63. We would rather say that plainly than let an address imply a presence we do not have.

What has to be printed on an Alberta scaffold tag?

Alberta OHS Code Part 23, section 326 requires the duty rating, the date of the last inspection, the name of the competent worker who inspected the scaffold, any precautions a worker must take, and the tag’s expiry date. Green, yellow and red indicate safe as erected, safe with the stated precautions, and do not use.

How often does a scaffold tag have to be re-inspected?

A scaffold that has gone more than 21 calendar days without an inspection is red-tagged, as is one that has been erected but is not yet in service. The tag has to carry the date of that last inspection, which is why the write-on field matters as much as the printing around it.

Does an SDS binder really have to be paper?

The Code requires the safety data sheet to be readily available at the work site. On a lease road or at a remote camp, a file on a server that needs a signal to open is not readily available in any practical sense, which is why physical SDS binders are still standard on Alberta sites.

How long will a decal last on equipment in the oil sands?

We will not give you a number, because nobody honestly can. Published film durability figures apply to unprinted film in defined exposure conditions, not to a printed graphic on equipment that gets pressure-washed and worked in winter. We will tell you which construction gives you the best chance and let you judge the rest.

Can you turn a rush order around for a shutdown?

Often. Production is normally seven to ten working days from proof approval plus freight, and rush work depends on what is already booked that week. Tell us the date you need it on site rather than the lead time you think you need, and you will get a straight answer either way.

Do you keep our artwork for reorders?

Yes. Artwork, tag numbering sequences and tab structures stay on file, so a reorder three years later for the next COR cycle comes off the same file rather than starting over.

ALSO DELIVERING TO

Anzac · Fort MacKay · Gregoire Lake Estates · Conklin · Janvier · Saprae Creek

1974Manufacturing since
5–15working-day production
Freeelectronic proof
Rushservice available
FORT MCMURRAY ORDERS

Talk to the people who make it.

Tell us the application and the date you need it on site. We will specify it properly — including telling you when the cheaper option is the right one, and when your date is not achievable.

Request a quote780.466.9973 · Monday to Friday, 8:00 to 4:30
DISTRIBUTOR PROGRAM

Distributors: sell it as your own.

Blind drop-shipping under your label, distributor pricing that protects your margin, and a factory that answers the phone. Apply for a trade account in two minutes.

Become a distributor